Spinning Wheels-



Restoring a Vintage Ashford Traditional Spinning Wheel

I purchased a neglected vintage Ashford Traditional spinning wheel so that I could bring her back to her former glory. You can read more about how I came across this wheel, and some things I discovered about its past in my, “I Found a Vintage Ashford Traditional” post.

Now it is time to get to work restoring this vintage Ashford Traditional spinning wheel! You can watch the transformation video here, but also keep reading for more details about how Mark and I took care of this wheel and got her spinning like new!

Restoring a Vintage Ashford Traditional Spinning Wheel Video

Identifying the Ashford Traditional

The first thing we did was determine the age of this wheel. Ashford has a wonderful chart to show the characteristics of the various Traditional models through the decades. Looking at the shape of the flyer supports and the spokes on the drive wheel were I identified this wheel to be a 1970’s model. Knowing the age of the wheel is important when ordering replacement parts. You can download the PDF of the Traditional timeline here.

Disassembling the Wheel

The next thing we did was disassemble the entire wheel. If you are restoring a traditional, or any other wheel I recommend taking it completely apart. Having it disassembled will help you clean and condition the wood. It will also help you clean up the hardware, especially if you are dealing with rusty parts. Finally, it will be much easier to discover worn out or broken pieces such as the shredded bearings we dug out of the drive wheel supports.

I also recommend that you take lots of pictures and document every single part you disassemble! You may think it looks obvious, you may think you will remember how it goes together, but document anyway! We had to wait several weeks for the replacement parts to arrive and the wheel was in pieces for over a month. That is a long time to remember how it all goes together!

Of course if you do run into trouble, the manual for the Traditional from Ashford is an super helpful resource. You can download the PDF for the single drive Traditional here.

Vintage Ashford Traditional spinning wheel disassembled
Ashford Traditional in Pieces

Caring for the Wood

It never hurts to give the wood of an older wheel a nice conditioning “bath” with a wood oil. I like to use Boiled Linseed Oil, but I know many spinners prefer using Danish Oil. Choose whatever quality wood oil you prefer.

I used a clean lint-free rag to wipe down all the wood. I left the oiled wood sitting for about an hour and then I used another clean rag to wipe off any oil that didn’t sink into the wood. It was an amazing transformation! The wood actually glowed after the oil treatiment!

Maintenance Kit

The next part of getting this Vintage Ashford Traditional all fixed up was to use the Ashford maintenance kit. It came with everything I needed including a new leather connector to replace the broken one, new hooks to replace the rusty ones on the flier, a new drive band, and springs and a cord for the scotch tension brake band.

Tension Peg

The scotch tension system works by stretching a nylon cord over the bobbin. It is tightened or loosened with a peg that is held in to the wheel with friction. Unfortunately, that means this peg can easily fall out if the wheel isn’t in use and get lost. That was the case with this wheel but fortunately, Ashford makes and sells replacement scotch tension knobs. The trick is knowing which peg you need. There are two styles of pegs available.

Older style Ashford flyer support and tension peg on the left; Newer style Ashford flyer support and tension peg on the right.

I have a newer Ashford Elizabeth that uses a peg just like the Traditional, so I put the two style of pegs next to each other with the corresponding flyer supports. The vintage peg and flyer support style is shown on the left and the new style is shown on the right in the picture above. If you need a replacement and you are unsure of which you need, contact your local Ashford dealer and they will make sure you get the right one.

A Fully Restored Vintage Traditional

Now that she is fully restored with glowing wood, working parts, a new tension knob, and a good oiling, she is ready to spin! With some TLC these old Ashford Traditionals make wonderful wheels that will spin for decades more!

Happy spinning!

10 thoughts on “Restoring a Vintage Ashford Traditional Spinning Wheel

  1. Sharon

    Thank you for this post. I have an Ashford Traditional that is pre 1973. I got it free from someone who was using it only as a decoration in her living room. I love the old fashioned look, and it spins like a charm, after some work. It came with only one bobbin, so I purchased three more bobbins, a jumbo bobbin, and a jumbo flyer. The leather holders for the flyer were upgraded to the modern so I could change out the flyers.
    I like to spin up two regular bobbins, then ply onto the jumbo bobbin so I can keep the full length of yarn. I also purchased a new regular flyer that has four whorl sizes, but haven’t figured out yet how to adjust for the other sizes. Perhaps I need the elastic band type instead of the cotton string?
    Keep up the good work. Thank you.
    [email protected]

    1. JillianEve

      Wow! What a find!!! I’m so glad you rescued that wheel and got it spinning again!

  2. Josh

    I am learning to spin on an Ashford like this one. I really enjoyed your restoration video and your tutorials are wonderful! Your bubbly personality is wonderful. I wish you all the best and thank you!

    1. JillianEve

      Thank you so much! Happy spinning!


    I was so excited to find your post. I just bought a spinning wheel at a yard sale and it is the same model. With your advice I was able to clean it up today and make sure all the parts are working. Once I get my maintenance kit I will be able to learn how to spin. Thank you!

    1. JillianEve

      That is so wonderful! Happy spinning!

  4. Lena

    Hi Jillian,
    I was wondering if you could possibly do another video that can help us identify the earlier models of the various wheels. Thanks for doing the other videos as they have helped me immensely with learning about my early traditional!!!

    1. JillianEve

      That would be a really interesting topic! I’ll see what research and digging I can do.


    Wow, so glad I found this information, I am going to look at Ashford Traditional tomorrow, and feel a lot more comfortable doing it, this is could be my first wheel and first time spinning, so excited
    I am definitely looking at the rest of you video, I don’t know of any spinner in my area. I am worried about how to set the tension on the wheel, you make it look so easy

    1. JillianEve

      I know I’m responding a bit late to your comment, but I hope you found a wheel! Happy spinning!

Comments are closed.